REXROTH拉桿油缸,力士樂產品說明
Installation dimension acc. to ISO 6020/2, DIN 24554 and NF/ISO 6020/2
7 types of mounting
Integrated guide socket for fast and easy maintenance
Optional self-adjusting or adjustable end position cushioning
Patented safety bleeding device for easy and safe bleeding
Easy assembly thanks to freely selectable position of
the line connections at cylinder head and cylinder base
可選擇自調節或可調末端位置緩沖
的安全出血裝置，便于安全出血
由于可自由選擇的位置，易于組裝
氣缸蓋和氣缸底座上的線路連接
耳軸位置可自由選擇。訂購時，請務必在純文本中以mm表示尺寸“XV”
不可以安裝MS2和活塞直徑為25 mm，zui終位置緩沖“E”
Not possible with type of mounting MX1 and MX3
Not standardized

REXROTH拉桿油缸,力士樂產品說明
See dimensions - Piston rod end E (Only possible with standardized piston
rod Ø 18 … 140 mm, observe max. operating pressure.
For max. available stroke length, see technical data, and for
admissible stroke length (according to the kinking calculation), see project planning information.
Not possible with MT1
For type of mounting ME5 and ME6, only position 1 and 3 possible
Order examples:
CGT3ME5/80/56/400Z3X/B11HHDMWW
Please observe the relevant restrictions when selecting!
活塞直徑為25 ... 100 mm：只有線路連接“B”可能。
活塞Ø125 ... 200 mm：只能使用DIN類型的安裝和線路連接“B”。
MX1和MX3的安裝類型不可能不規范
見尺寸 - 活塞桿端E（僅限標準活塞
桿Ø18 ... 140 mm，觀察zui大運營壓力。
zui大可用行程長度，參見技術數據和
行程長度（根據扭結計算），參見項目規劃信息。MT1不可能
對于ME5和ME6的安裝類型，只能使用位置1和3訂單示例：
Trunnion position freely selectable. When ordering, always specify the dimensions “XV” in mm in the plain text
Not possible with type of mounting MS2 and piston Ø 25 mm and end position cushioning “E”
With piston Ø 25 … 100 mm: only line connection “B” possible.
With piston Ø 125 … 200 mm: only DIN types of mounting and line connection “B” possible.